Posted in

What is the thickness of Blockboard?

If you’ve ever worked on a furniture build, cabinet installation, or interior wall paneling, chances are you’ve heard of blockboard. But as a blockboard supplier who’s talked to hundreds of contractors, cabinetmakers, and DIYers over the last 12 years, I’ll tell you one question comes up more than any other: “What’s the right thickness for blockboard?” It’s not a one-size-fits-all answer—miss the mark here, and you’ll end up with a cabinet door that warps, a bookshelf that sags, or a wall panel that feels flimsy instead of sturdy. Let’s break this down, because picking the wrong thickness isn’t just about budget—it’s about function. Blockboard

First, let’s make sure we’re all on the same page about what blockboard actually is, because confusing it with plywood or MDF is a common mistake. At its core, blockboard is a engineered wood panel made of solid wood strips (called “blocks”) glued together along their length, with thin veneers of hardwood or softwood glued to both faces. The core strips are usually pine, poplar, or rubber wood—affordable, stable, and resistant to warping way more than solid wood. That’s why it’s such a popular alternative to solid wood for projects that need strength without the high cost. The thickness of blockboard refers to the total measurement from its top veneer to the bottom veneer, right down through the core strips. That number isn’t random; it’s engineered to match the job it’s meant for.

The most common thicknesses you’ll find in standard blockboard inventory are 16mm, 19mm, 25mm, and 38mm. Let’s go through each one, because there’s a time and place for every single size. I see customers reach for the wrong thickness all the time—like someone buying 16mm blockboard to make a kitchen countertop, or 38mm for a small bathroom cabinet door. That’s a quick way to end up with a project that doesn’t hold up.

Starting with the 16mm blockboard. This is the thinnest standard size we stock, and it’s meant for projects that don’t need heavy structural support. Most of the time, 16mm is used for things like interior partition walls, temporary shelves, underlayment for tile or vinyl, or even crafting and display boards. Wait, let me be clear: it’s not for load-bearing parts. We had a customer a few years back try to use 16mm blockboard for kitchen cabinet sides, and six months later, the doors were sagging because the thin core couldn’t handle the weight of the drawers and dishes. The 16mm is lightweight, easy to cut and drill, and way cheaper than thicker sizes, but its low thickness means it doesn’t have the rigidity for weight-bearing or frequent use. I’d never recommend it for furniture components that need to support anything heavy, but it’s perfect for non-structural interior elements. If you’re working on a rentable space and need a quick, low-cost partition, or a kid’s bedroom wall shelf that won’t hold more than a few books, 16mm is the right call.

Next up is 19mm blockboard, and this is the workhorse of our inventory. This is the thickness most of our repeat customers reach for, and for good reason. It strikes the perfect balance between strength, weight, and cost, making it ideal for almost all residential furniture projects. Kitchen cabinet doors and sides? 19mm. Wardrobe interiors, bookshelves, and dresser drawers? 19mm. Even small bathroom vanities, as long as they’re not countertop height. The core of 19mm blockboard is thick enough to handle screws and fittings without splitting—unlike thinner panels, which often crack when you drill hardware into them. We test every batch of our 19mm blockboard for moisture resistance too, so if you’re using it in a laundry room or a bathroom with good ventilation, it won’t swell or warp. That said, 19mm isn’t for everything. If you’re making a dining table top or a large bookshelf that holds heavy reference books, it might flex a little over time. But for 90% of the projects our customers bring us, 19mm is the sweet spot. Last year, a local cabinetmaker ordered 20 sheets of 19mm blockboard for 12 kitchen installations, and every single client commented on how solid the cabinets felt, without the price tag of solid oak plywood. That’s the value of picking the right thickness.

Then there’s the 25mm blockboard, which is where we start getting into structural use. If you’re making something that needs to support heavy weight, this is the thickness you want. Think of kitchen countertop bases, heavy-duty bookshelves that hold encyclopedias, closet hanging rods, or bathroom vanity tops. The 25mm core is thick enough that it doesn’t flex even when loaded with 50 pounds or more—we’ve tested it in our warehouse, stacking 60 pounds of stone pavers on a 25mm sheet for 72 hours, and there was zero warping or bending. It’s also thicker, so when you edge-band it to match your cabinetry, the edge looks smooth and solid, not thin and flimsy. We even use 25mm blockboard for some of our own store fixtures—our display shelves hold dozens of sample door styles, and they’ve been up for three years without any issues. That doesn’t mean you waste it on projects that don’t need it, though. A customer who ordered 25mm blockboard for a small coffee table was shocked by the extra cost, and later told us they’d have been fine with 19mm. My rule of thumb: if your project will hold more than 30 pounds per linear foot, go 25mm. If it’s under that, 19mm is enough.

Now, the thickest standard size we offer is 38mm blockboard. This is for heavy-duty, commercial, or large-scale projects. You’ll see this used in things like storefront display counters, auditorium seating components, industrial shelving, or even structural wall panels in commercial buildings. It’s overkill for most residential jobs—you’d never use it for a bedroom dresser, because it’s heavy and expensive. But for a restaurant building custom wine racks that hold hundreds of bottles, or a retail store’s checkout counter that needs to handle constant foot traffic and weight, 38mm is exactly what you need. The core is so thick that it can support extreme loads without any deflection, and it’s highly resistant to impact—something thinner panels just can’t handle. We only recommend 38mm for projects where structural integrity is non-negotiable, because the cost is almost double that of 19mm, and the weight means you need extra manpower to transport and install it.

Wait, but what about custom thicknesses? A lot of our customers ask if we can cut blockboard to a non-standard size, like 22mm or 30mm. The short answer is, sometimes, but it’s not ideal. Blockboard’s core is made of solid strips, so custom thicknesses require adjusting the core and veneers, which can throw off the panel’s balance and lead to warping over time. We only offer custom thicknesses for bulk commercial orders, and even then, we test every panel for stability before delivery. For most residential and small commercial projects, sticking to the standard thicknesses is better—they’re engineered to be balanced, so they won’t warp or flex as much as a custom-cut panel.

A common misconception we run into is that thicker blockboard is always better. That’s not true. I mentioned the customer who ordered 25mm for a coffee table—they paid $120 extra for a thickness they didn’t need. Thicker blockboard is denser, yes, but excess thickness adds unnecessary weight and cost. It’s like buying a truck to drive to the grocery store: it works, but it’s not practical. The key is matching the thickness to the load and purpose. Let’s put that in simple terms for anyone who’s not sure:

  • 16mm: Light, non-structural (partitions, temporary shelves, displays)
  • 19mm: General furniture (cabinets, dressers, small bookshelves, bathroom cabinets)
  • 25mm: Heavy structural use (countertops, large bookshelves, wine racks)
  • 38mm: Commercial/industrial use (store fixtures, auditorium parts, heavy industrial shelving)

Another thing that affects blockboard thickness? Veneer grade. We offer different veneers on our blockboard—hardwood (oak, teak, maple) and softwood (pine, plywood). The veneer adds a tiny amount to the total thickness, but most suppliers count the veneer as part of the total, so you don’t have to adjust. If you’re ordering pre-finished blockboard, the finish (paint, laminate) might add another 1-2mm, but that’s a separate factor from the core thickness.

We also get questions about moisture-resistant blockboard, which is a special type we stock for bathrooms and laundries. Even the moisture-resistant version comes in the same thicknesses, so you still follow the same rules—use 19mm for a small bathroom vanity, 25mm for a larger one that holds a stone countertop. The moisture resistance comes from the adhesive in the core, not the thickness, so don’t think a thicker moisture-resistant panel is automatically better for a high-moisture space. That’s a mistake we see all the time.

Over the years, we’ve also noticed a shift in what customers are asking for. Five years ago, most residential customers wanted the thickest blockboard they could get, thinking it meant better quality. Now, they’re more educated—they’re asking about load capacity, project type, and cost, and picking the right thickness accordingly. That’s why I wrote this: too many people waste money on extra thickness, or end up with a project that fails because they picked too thin.

If you’re unsure which thickness is right for your project, the best thing to do is reach out. As a blockboard supplier with 12 years in the business, I’ve helped thousands of customers pick the right size, and I can walk you through exactly what you need based on your project, load, and budget. We stock all standard thicknesses in bulk and small quantities, so whether you’re a DIYer working on a one-off bookshelf or a contractor needing 100 sheets for a commercial build, we have what you need. Don’t guess at the thickness—get the right panel for your job, and your project will hold up for years to come.

If you’re ready to get blockboard for your next project, feel free to connect with our team to discuss your requirements, confirm availability, and get a customized quote based on the thickness and quantity you need.

Blockboard References

  1. Wood Industry Association. (2021). Engineered Wood Panels: Properties and Applications. National Wood Construction Standards.
  2. Blockboard Manufacturers Association. (2022). Standard Thickness Specifications for Blockboard for Residential and Commercial Use.
  3. International Code Council. (2020). Residential Construction Guide for Structural Panel Materials.

Jiangshan Shunlong Wood Industry Co., Ltd.
As one of the most professional blockboard manufacturers and suppliers in China, our products have good reputation in the market. Please feel free to wholesale bulk blockboard in stock here and get quotation from our factory. We also accept customized orders.
Address: No.7 Jinfeng Road, Jintangshan Industrial Zone, Hecun Town, Jiangshan City, Quzhou City, Zhejiang Province
E-mail: 17858202655@163.com
WebSite: https://www.shunlongwood.com/